closest point on optical axis with an image that has „acceptable sharpness“

Where CoC is the Circle of Confusion (the largest accepted Airy-disk) in **Millimeter**.

Alternatively, we can express the NearPoint using the magnification M :

If we use for example a 1/2.5″ 5 Aptina Megapixel

A 5 Mega lens with f=7.2mm focal length and F-stop F2.4, focused to an object distance of 100mm then has a far point of

und einen Nahpunkt von

and thus

**greyscale**Sensor mit 2.2 pixel pitch, we can use the pixel diagonal as CoC for crisp images, sayA 5 Mega lens with f=7.2mm focal length and F-stop F2.4, focused to an object distance of 100mm then has a far point of

und einen Nahpunkt von

and thus

If instead we use a 5 Megapixel

A 5 Mega lens with f=7.2mm focal length and F-stop F2.4, focussed to 100mm then results in

mm

and a nearpoint of

thus we get

**greyscale**Sony Sensor with 3.45 pixel pitch, we can choose as CoC the diagonal of the pixel for crisp images, sayA 5 Mega lens with f=7.2mm focal length and F-stop F2.4, focussed to 100mm then results in

mm

and a nearpoint of

thus we get

If we use a

**color**sensor instead we can use for crisp images. For the two sensors above we then get:To increase the DOF we can increase the Pixel Size, but we either lose resolution, or (at the same pixel count) the magnification changes)

If you change the focal length of a lens in a way, that (with the

see also https://www.optowiki.info/blog/can-i-increase-the-dof-by-changing-the-focal-length/

**same**sensor) you get the**same**FOV (then from a different distance) this results in the**same**DOF !!!see also https://www.optowiki.info/blog/can-i-increase-the-dof-by-changing-the-focal-length/

To increase the DOF we can

**keep the working distance and the pixel size**while reducing the sensor size, but then we lose resolution (because less of the same size pixels fit on the now smaller sensor)When a lens is focussed to the hyperfocal distance H, the far point is at and the near point is at .

The DOF is then, thus focussing to the hyperfocal distance results in the largest possible DOF.

The DOF is then, thus focussing to the hyperfocal distance results in the largest possible DOF.

Yet another way to express the Near-Point is to use the Hyperfocal distance H :

If the lens is then focused to some object distance OD, this OD can be expressed as fraction of H :

or

Then the near point is

,

the far point is

and the Depth of field is

When we set the object distance OD to the hyperfocal distance H, we get:

Therefore from

we get

.

This means however, that

and therefore,

Therefore from

we get

.

This means however, that

and therefore,

For a lens with f=12mm, F#=2.8 and a CoC of 3.1um we get

**For we get**

So, with

and

we get

**For we get**

So, with

and

we get

Therefore by decreasing the OD by factor 2, the DOF decreased by factor 4.

When the magnification increases by factor 2, the DOF decreases by factor 4

or, equivalent :

When the object distance decreases by factor 2, the DOF decreases by factor 4